Tiba STEAM6007 Bedienungsanleitung PDF herunterladen (Seite 26)

Replacing the slide-in rails

1. Reinsert the rail inclined from above into

the rear hooks along the side wall.

2. Swivel the grid on the front mounting

bracket over the bolt to the wall.

3. Insert the rail into the front hooks.

Steam generation system

1 Important: Wipe the steam generator

dry after each use. Soak up water with

a sponge.

3 Remove any lime residue with water and

vinegar.

1 Important: Chemical descaling agents

can damage the oven's surface enamel.

Always follow the manufacturer's in-

structions exactly.

Water Drawer and Steam Generator

1. Pour water and vinegar (about 250 ml)

into the steam generator via the water

drawer.

Leave to work for approx. 10 minutes.

2. Remove the water and vinegar with a

non-abrasive sponge.

3. Rinse out the steam generation system

through the water drawer using clean

water (100-200 ml).

4. Soak up remaining water from the

steam generator with the sponge and

wipe dry.

5. Leave the oven door open to let the

oven dry out completely.

Oven Light

1 Danger of electrocution! Before re-

placing the oven light bulb:

• Switch off the oven.

• Take the fuses out of the fuse box, or

switch off.

3 To protect the oven light bulb and the

glass cap, lay a cloth on the bottom of

the oven.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Keine Kommentare

Tiba STEAM6007 Bedienungsanleitung Seite 26