
7
After approx. 5 seconds, the flashing stops
and the clock displays the time set.
The appliance is now ready to use.
3 The time can only be changed if no au-
tomatic function (Duration or End )
has been set.
Initial Cleaning
You should clean the oven before using it for
the first time.
1 Caution: Do not use any caustic, abra-
sive cleaners! The surface could be
damaged.
3 To clean the external parts of the oven,
only use a cloth well wrung out with
warm water to which a little washing up
liquid has been added or a commercially
available cleaner specifically designed
for this purpose.
To prevent damaging the door or door glass,
avoid the use of the following:
• Household detergent and bleaches
• Impregnated pads unsuitable for non-
stick saucepans
• Brillo/Ajax pads or steel wool pads
• Chemical oven pads or aerosols
• Rust removers
• Bath/Sink stain removers
1. Turn the oven function switch to oven
lighting .
2. Remove all accessories and the shelf
support rails and wash them with warm
water and washing up liquid.
3. Wipe the front of the appliance with a
damp cloth.
Using the Rings
3 Also refer to the operating instructions
for your built-in hob. It contains impor-
tant information on ovenware, opera-
tion, cleaning and care.
Heat settings
• Heat settings can be set in the range 1 -
9.
• Half-way settings are available between
1 and 9.
1 = lowest power
9 = highest power
= double ring switch
2 Switch the cooking zone off approx. 5-
10 minutes before cooking is finished to
make use of the residual heat. This
saves electricity.
Kommentare zu diesen Handbüchern